CentOS obs直播RTMP协议推流到Nginx流媒体服务器到VUE使用HLS直播

sudo rpm -Uvh https://packages.microsoft.com/config/centos/7/packages-microsoft-prod.rpm

; Sample supervisor config file.  [unix_http_server] file=/run/supervisor/supervisor.sock   ; (the path to the socket file) ;chmod=0700                 ; sockef file mode (default 0700) ;chown=nobody:nogroup       ; socket file uid:gid owner ;username=user              ; (default is no username (open server)) ;password=123               ; (default is no password (open server))  [inet_http_server]         ; inet (TCP) server disabled by default port=*:9001        ; (ip_address:port specifier, *:port for all iface) ;username=user              ; (default is no username (open server)) ;password=123               ; (default is no password (open server))  [supervisord] logfile=/www/log/supervisor/supervisord.log  ; (main log file;default $CWD/supervisord.log) logfile_maxbytes=50MB       ; (max main logfile bytes b4 rotation;default 50MB) logfile_backups=10          ; (num of main logfile rotation backups;default 10) loglevel=info               ; (log level;default info; others: debug,warn,trace) pidfile=/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid) nodaemon=false              ; (start in foreground if true;default false) minfds=1024                 ; (min. avail startup file descriptors;default 1024) minprocs=200                ; (min. avail process descriptors;default 200) ;umask=022                  ; (process file creation umask;default 022) ;user=chrism                 ; (default is current user, required if root) ;identifier=supervisor       ; (supervisord identifier, default is 'supervisor') ;directory=/tmp              ; (default is not to cd during start) ;nocleanup=true              ; (don't clean up tempfiles at start;default false) ;childlogdir=/tmp            ; ('AUTO' child log dir, default $TEMP) ;environment=KEY=value       ; (key value pairs to add to environment) ;strip_ansi=false            ; (strip ansi escape codes in logs; def. false)  ; the below section must remain in the config file for RPC ; (supervisorctl/web interface) to work, additional interfaces may be ; added by defining them in separate rpcinterface: sections [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface  [supervisorctl] serverurl=unix:///run/supervisor/supervisor.sock ; use a unix:// URL  for a unix socket serverurl=http://*:9001 ; use an http:// url to specify an inet socket ;username=chris              ; should be same as http_username if set ;password=123                ; should be same as http_password if set ;prompt=mysupervisor         ; cmd line prompt (default "supervisor") ;history_file=~/.sc_history  ; use readline history if available  ; The below sample program section shows all possible program subsection values, ; create one or more 'real' program: sections to be able to control them under ; supervisor.  ;[program:theprogramname] ;command=/bin/cat              ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1                    ; number of processes copies to start (def 1) ;directory=/tmp                ; directory to cwd to before exec (def no cwd) ;umask=022                     ; umask for process (default None) ;priority=999                  ; the relative start priority (default 999) ;autostart=true                ; start at supervisord start (default: true) ;autorestart=true              ; retstart at unexpected quit (default: true) ;startsecs=10                  ; number of secs prog must stay running (def. 1) ;startretries=3                ; max # of serial start failures (default 3) ;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT               ; signal used to kill process (default TERM) ;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10) ;user=chrism                   ; setuid to this UNIX account to run the program ;redirect_stderr=true          ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10) ;stdout_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0) ;stdout_events_enabled=false   ; emit events on stdout writes (default false) ;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10) ;stderr_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0) ;stderr_events_enabled=false   ; emit events on stderr writes (default false) ;environment=A=1,B=2           ; process environment additions (def no adds) ;serverurl=AUTO                ; override serverurl computation (childutils)  ; The below sample eventlistener section shows all possible ; eventlistener subsection values, create one or more 'real' ; eventlistener: sections to be able to handle event notifications ; sent by supervisor.  ;[eventlistener:theeventlistenername] ;command=/bin/eventlistener    ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1                    ; number of processes copies to start (def 1) ;events=EVENT                  ; event notif. types to subscribe to (req'd) ;buffer_size=10                ; event buffer queue size (default 10) ;directory=/tmp                ; directory to cwd to before exec (def no cwd) ;umask=022                     ; umask for process (default None) ;priority=-1                   ; the relative start priority (default -1) ;autostart=true                ; start at supervisord start (default: true) ;autorestart=unexpected        ; restart at unexpected quit (default: unexpected) ;startsecs=10                  ; number of secs prog must stay running (def. 1) ;startretries=3                ; max # of serial start failures (default 3) ;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT               ; signal used to kill process (default TERM) ;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10) ;user=chrism                   ; setuid to this UNIX account to run the program ;redirect_stderr=true          ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10) ;stdout_events_enabled=false   ; emit events on stdout writes (default false) ;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups        ; # of stderr logfile backups (default 10) ;stderr_events_enabled=false   ; emit events on stderr writes (default false) ;environment=A=1,B=2           ; process environment additions ;serverurl=AUTO                ; override serverurl computation (childutils)  ; The below sample group section shows all possible group values, ; create one or more 'real' group: sections to create "heterogeneous" ; process groups.  ;[group:thegroupname] ;programs=progname1,progname2  ; each refers to 'x' in [program:x] definitions ;priority=999                  ; the relative start priority (default 999)  ; The [include] section can just contain the "files" setting.  This ; setting can list multiple files (separated by whitespace or ; newlines).  It can also contain wildcards.  The filenames are ; interpreted as relative to this file.  Included files *cannot* ; include files themselves.  [include] files = supervisord.d/*.conf ;这行默认是加载/etc/supervisord.d/目录内所有conf后缀的配置，喜欢用ini的可以改成ini

systemctl enable supervisord.service

systemctl is-enabled supervisord

user  www www; worker_processes auto; error_log  /www/wwwlogs/nginx_error.log  crit; pid        /www/server/nginx/logs/nginx.pid; worker_rlimit_nofile 51200;  stream {     log_format tcp_format '$time_local|$remote_addr|$protocol|$status|$bytes_sent|$bytes_received|$session_time|$upstream_addr|$upstream_bytes_sent|$upstream_bytes_received|$upstream_connect_time';        access_log /www/wwwlogs/tcp-access.log tcp_format;     error_log /www/wwwlogs/tcp-error.log;     include /www/server/panel/vhost/nginx/tcp/*.conf; }  events     {         use epoll;         worker_connections 51200;         multi_accept on;     } #RTMP服务，新增部分： rtmp_auto_push on; rtmp{     server{         listen 1935;        #服务端口         chunk_size 4096;    #数据传输块的大小                  application vod{             play ./vod;   #视频文件存放位置         }         application live{             live on;                     #开启直播             hls on;                           hls_path /www/m3u8File;                       hls_fragment 5s;             #每个视频切片的时长             hls_playlist_length 16s;             recorder myRecord {                     record_path /rec;             record all manual;                     record_suffix -%Y-%m-%d-%H_%M_%S.flv;             }             hls_continuous on;          #连续模式             hls_cleanup on;             #对多余的切片进行删除             hls_nested on;              #嵌套模式         }     } } #RTMP服务，新增完毕   http     {         include       mime.types;         #include luawaf.conf;          include proxy.conf;          default_type  application/octet-stream;          server_names_hash_bucket_size 512;         client_header_buffer_size 32k;         large_client_header_buffers 4 32k;         client_max_body_size 50m;          sendfile   on;         tcp_nopush on;          keepalive_timeout 60;          tcp_nodelay on;          fastcgi_connect_timeout 300;         fastcgi_send_timeout 300;         fastcgi_read_timeout 300;         fastcgi_buffer_size 64k;         fastcgi_buffers 4 64k;         fastcgi_busy_buffers_size 128k;         fastcgi_temp_file_write_size 256k;         fastcgi_intercept_errors on;          gzip on;         gzip_min_length  1k;         gzip_buffers     4 16k;         gzip_http_version 1.1;         gzip_comp_level 2;         gzip_types     text/plain application/javascript application/x-javascript text/javascript text/css application/xml;         gzip_vary on;         gzip_proxied   expired no-cache no-store private auth;         gzip_disable   "MSIE [1-6].";          limit_conn_zone $binary_remote_addr zone=perip:10m;         limit_conn_zone $server_name zone=perserver:10m;          server_tokens off;         access_log off;  server     {         listen 888;         server_name phpmyadmin;         index index.html index.htm index.php;         root  /www/server/phpmyadmin;          #error_page   404   /404.html;         include enable-php.conf;          location ~ .*.(gif|jpg|jpeg|png|bmp|swf)$         {             expires      30d;         }          location ~ .*.(js|css)?$         {             expires      12h;         }          location ~ /.         {             deny all;         }          access_log  /www/wwwlogs/access.log;     } include /www/server/panel/vhost/nginx/*.conf; }

server {     listen 80;     server_name xxxxxxx;     index index.php index.html index.htm default.php default.htm default.html;     root /www/wwwroot/live;      #SSL-START SSL相关配置，请勿删除或修改下一行带注释的404规则     #error_page 404/404.html;     #SSL-END      #ERROR-PAGE-START  错误页配置，可以注释、删除或修改     #error_page 404 /404.html;     #error_page 502 /502.html;     #ERROR-PAGE-END      #PHP-INFO-START  PHP引用配置，可以注释或修改     include enable-php-00.conf;     #PHP-INFO-END     try_files $uri $uri/ /index.html;     #REWRITE-START URL重写规则引用,修改后将导致面板设置的伪静态规则失效     include /www/server/panel/vhost/rewrite/www.live.com.conf;     #REWRITE-END      #禁止访问的文件或目录     location ~ ^/(.user.ini|.htaccess|.git|.svn|.project|LICENSE|README.md)     {         return 404;     }      #一键申请SSL证书验证目录相关设置     location ~ .well-known{         allow all;     }      #禁止在证书验证目录放入敏感文件     if ( $uri ~ "^/.well-known/.*.(php|jsp|py|js|css|lua|ts|go|zip|tar.gz|rar|7z|sql|bak)$" ) {         return 403;     }      location ~ .*.(gif|jpg|jpeg|png|bmp|swf)$     {         expires      30d;         error_log /dev/null;         access_log /dev/null;     }      location ~ .*.(js|css)?$     {         expires      12h;         error_log /dev/null;         access_log /dev/null;     }  #新增部分     location /live{             types{                 #m3u8 type设置                 application/vnd.apple.mpegurl m3u8;                 #ts分片文件设置                 video/mp2t ts;             }               #访问权限开启，否则访问这个地址会报403                         autoindex on;                                      #指向访问m3u8文件目录             alias /www/m3u8File;             expires -1;             add_header Cache-Control no-cache;             #防止跨域问题             add_header 'Access-Control-Allow-Origin' '*';             add_header 'Access-Control-Allow-Credentials' 'true';             add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS';             add_header 'Access-Control-Allow-Headers' 'DNT,X-CustomHeader,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type';           }          location /control{             rtmp_control all;         }                  location /stat{             rtmp_stat all;             rtmp_stat_stylesheet stat.xsl;         }         location /stat.xsl{             root ./nginx-rtmp-module;         } #新增完毕     access_log  /www/wwwlogs/www.live.com.log;     error_log  /www/wwwlogs/www.live.com.error.log; }