- A+
所属分类:.NET技术
您的位置:德国托马斯阀门(Thomas) - 公司新闻
进口潜水排污泵原理特点及品牌(图)
作者:托马斯·贝尔森·伍德 发布时间:2021-01-16 13:04:27点击:201
进口潜水排污泵原理特点
进口潜水排污泵采用德国托马斯(Thomas)先进的技术,特别适用于输送含有坚硬固体、纤维的液体,以及特别脏、粘和滑的液体。所有进口潜水排污泵均装有经调整好的撕裂结构能将污水中长纤维、袋、带、草、布条等撕裂后排出。因此,在污水中工作不会堵塞运行极为可靠。
主要特点
1、采用先进技术,排污能力强,无堵塞,能有效地通过直径φ30-φ80毫米的固体颗粒。
2、撕裂机构能够把纤维物质撕裂,切断,然后顺利排放,无需在泵上加滤网。
3、设计合理,配套电机功率小,节能效果显著。
4、用最新材料的机械密封,可以使泵安全连续运行在8000小时以上。
5、结构紧凑,移动方便,安装简单,可减少工程造价,无需建造泵房。
6、能够在全扬程范围内使用,而保证电机不会过载。
7、浮球天并可以根据所需的水位变化,自动控制泵的启动与停止,不需专看管。
8、双导轨自动安装系统,它给安装、维修带来了极大的方便,人可不必为此而进出污水坑。
9、配备全自动保护控制箱对产品的漏电、漏水以及过载等进行了有效保护,提高了产品的安全性与可靠性。
产品用途
1、工厂、商业严重污染废水的排放
2、医院、宾馆的污水排放
3、城市污水处理厂排放系统
4、市政工程、建筑工地
5、住宅区的污水排水系统
6、勘探、矿山配套附机
7、人防系统排水站
8、农村沼气池、农田灌溉
Diving sewage pump using the German Thomas (AHNK) advanced technology, especially for conveying solid containing solid, fiber, and particularly dirty, sticky and slippery liquid. All imported submersible sewage pumps are equipped with a modified tear structure can be sewage in the long fiber, bags, belts, cloth, etc. after tearing out. Therefore, the work in the sewage will not be blocked very reliable operation.
Main feature
1, the use of advanced technology, strong sewage capacity, no clogging, can effectively through the diameter φ30-φ80 mm solid particles.
2, the tearing mechanism can tear the fiber material, cut off, and then smooth emissions, without the need for filter on the filter.
3, the design is reasonable, the matching motor power is small, the energy conservation effect is remarkable.
4, with the latest material of the mechanical seal, you can make the pump safe continuous operation in 8000 hours or more.
5, compact structure, easy to move, easy to install, can reduce the project cost, no need to build pump room.
6, can be used in the whole lift range, and to ensure that the motor will not overload.
7, the ball days and can be based on the required water level changes, automatic control of the pump start and stop, without special care.
8, dual-rail automatic installation system, it is to install, repair has brought great convenience, people do not have to enter and leave the pits for this.
9, equipped with automatic protection control box on the product leakage, leakage and overload and other effective protection, improve product safety and reliability.
Product Usage
1, factories, commercial serious pollution of wastewater discharge
2, hospitals, hotels, sewage discharge
3, urban sewage treatment plant emissions system
4, municipal works, construction sites
5, residential area of sewage drainage system
6, exploration, mining supporting machine
7, civil air defense system drainage station
8, rural biogas digesters, farmland irrigation
进口潜水排污泵品牌
德国托马斯阀门集团于1933年创建于德国鲁尔工业区,也是世界最重要的工业区。位于德国西部、莱茵河下游支流鲁尔河与利珀河之间的地区。德国托马斯阀门集团是以生产高品质、先进的阀门、测量及控制系统而享誉全球的跨国性生产企业。采用世界先进的设备及生产工艺,所有产品都在严格的质量体系监控下完成作业。并在各大洲几十个国家拥有子公司及分支机构。
新闻资讯
- 进口气动薄膜调节阀(图)2021-01-17 17:53:51
- 进口不锈钢电动调节阀(图)2021-01-17 17:53:51
- 进口氧气专用套筒调节阀(图)2021-01-17 17:53:49
- 进口泄氮阀(图)2021-01-17 17:53:48
- 进口气动精小型调节阀(图)2021-01-17 17:53:47
- 进口气动低温调节阀(图)2021-01-17 17:53:45
- 进口气动衬氟调节阀(图)2021-01-17 17:53:43
- 进口气动三通调节阀(图)2021-01-17 17:53:42
- 进口气动隔膜调节阀(图)2021-01-17 17:53:42
德国托马斯阀门中国一级总代理 XML地图